Download Print this page

Advertisement

Quick Links

UJF-7151 plusII / UJF-3042MkII e / UJF-3042MkII EX e /
UJF-6042MkII e
High-speed Braille Print Guide
This guide shows you how to print braille with the UJF-7151 plusII / UJF-3042MkII e / UJF-3042MkII EX e /
UJF-6042MkII e.
Read this guide thoroughly before use.

Note

• It is strictly prohibited to write or copy a part or whole of this document without our approval.
• This document has been carefully prepared for your easy understanding, however, please do not hesitate to
contact a distributor in your district or our office if you have any inquiry.
• Description contained in this document are subject to change without notice for improvement.
• Copying the Mimaki Engineering Co. Ltd. software described in this guide to other disks (except for backup
purposes) or loading it to memory except for the purpose of running it, is strictly prohibited.
• Due to improvement or change of software, the description of this document could be partially different in
specification, for which your understanding is requested.
• With the exception of what is provided for in the warranty provisions of MIMAKI ENGINEERING CO., LTD., we
do not assume any liability against the damages (including but not limited to the loss of profit, indirect damage,
special damage or other monetary damages) arisen out of the use or failure to use of this product. The same
shall also apply to the case even if MIMAKI ENGINEERING CO., LTD. had been notified of the possibility of
arising damages in advance. As an example, we shall not be liable for any loss of the media made using this
product or indirect damages caused by the product made using this media.
• You can also download the latest operation manual from our website.
Notations used in this document
• Items and buttons displayed in menus and on screens are marked with square brackets ([ ]) as in [File].
Symbols
• This symbol indicates important information for using this product.
• This symbol indicates useful information.
RasterLink is the trademarks or registered trademarks of MIMAKI ENGINEERING CO., LTD. in Japan and in
other countries.
Adobe, the Adobe logo, Acrobat, Illustrator, Photoshop, and PostScript are the trademarks or registered
trademarks of Adobe Systems Incorporated in the United States and other countries. CorelDRAW is a
trademark or registered trademark of Corel Corporation in Canada, the United States and other countries, and
its affiliates.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation of the United States
and other countries.
Apple and Macintosh are trademarks or registered trademarks of Apple Inc. of the United States and other
countries.
Other company and product names mentioned herein are the trademarks or registered trademarks of the
respective companies in Japan and in other countries.

Advertisement

loading

Summary of Contents for MIMAKI UJF-7151 plusII

  • Page 1: Note

    UJF-7151 plusII / UJF-3042MkII e / UJF-3042MkII EX e / UJF-6042MkII e High-speed Braille Print Guide This guide shows you how to print braille with the UJF-7151 plusII / UJF-3042MkII e / UJF-3042MkII EX e / UJF-6042MkII e. Read this guide thoroughly before use.
  • Page 2: Table Of Contents

    Table of Contents Note ..........................1 About Braille Printing ....................3 Target Environment ....................4 Recommended Media for Each Ink ................7 Printing in Standard Mode/High-Speed Mode ............8 - 2 -...
  • Page 3: About Braille Printing

    About Braille Printing RasterLink offers the following three different braille printing modes: • Standard mode • High-speed mode • Compliant mode • The braille printing modes available will vary depending on the model and ink set. (Refer to P.4 “Target Environment”) •...
  • Page 4: Target Environment

    High-speed mode Laminates using a mixture of CMYK ink Options are available to allow printing of white ink over the braille. Media Media Color image printed over braille Braille printed over color image •A mixture of CMYK ink is laminated to the specified height for the braille. •The settings can be altered to vary color image and braille printing order.
  • Page 5 6 Color+SP Ink set Special color set Standard mode High-speed mode LH-100 CMYKLcLm LUS-120 CMYKLcLm LUS-150 CMYKLcLm Not supported LUS-200 CMYKLcLm Not supported  Print conditions In RasterLink, device profiles with the following conditions should be installed for each ink set. •...
  • Page 6  UJF-7151plusII  Ink sets and supported braille modes 4 Color+SP Ink set Special color set Standard mode High-speed mode LH-100 CMYK CIPWW LUS-120 CMYK CIPWW LUS-350 CMYK Not supported *1 : Braille is printed in CMYK + clear mixed colors. 6 Color+SP Ink set Special color set...
  • Page 7: Recommended Media For Each Ink

    Recommended Media for Each Ink Substrate LH-100 LUS-120 Polycarbonate Polystyrene PET w/ Adhesive Coating HK31WF PET w/ Adhesive Coating U292W Not available Using media other than the recommended above may cause issues such as these. •Media becomes warped and rubs against the heads. •Ink eventually peels off the media.
  • Page 8: Printing In Standard Mode/High-Speed Mode

    Printing in Standard Mode/High-Speed Mode The explanation is provided in the following order: 0. [RasterLink] Initial preparation ( P.9) 1. [Illustrator] Create image containing braille data ( P.9) 2. [RasterLinkTools] Configure the braille settings and output to RasterLink P.10) 3. [RasterLink] Check the settings ( P.11) 4.
  • Page 9 Creating braille date using ellipse tool (1) Based on the Braille syntax, check the Example Braille arrangement for the character you want to create. Mimaki (2) Use the Ellipse Tool in Illustrator to create the following shape. • Shape: Perfect circle • Diameter: Compliant with Braille standards.
  • Page 10 (3) Layout the shape you created in (2) based on the standards for Braille of JIS. [RasterLinkTools] Configure the Braille Settings and Output to RasterLink (1) Select all of the braille data. (2) Click the [Braille] icon in RasterLinkTools. • The [Braille Function RL Output] window appears. (3) Select “High-speed”...
  • Page 11 Standard mode Varies the braille height. Level 1: Approx. 0.3 mm [Level] Level 2: Approx. 0.5 mm Level 3: Approx. 0.7 mm Level 4: Approx. 0.9 mm Specifies the printing order for the color image forming [Composite Order] the base for the braille. Difference in print results depending on [Composite Order] settings [Composite Order] Color →...
  • Page 12 [RasterLink] Print (1) Click the [Execution] icon (2) Select [RIP and Print], then click [Start]. - 12 -...
  • Page 13 - 13 -...
  • Page 14 D203842-10-19012024 © MIMAKI ENGINEERING CO., LTD.2017...

This manual is also suitable for:

Ujf-3042mkii eUjf-3042mkii ex eUjf-6042mkii e