Ink Tank Replacement Method; When Ink Near End Is Displayed; When Ink End Is Displayed; Replacing The Ink Tank - MIMAKI Tiger600-1800TS Operation Manual

Chapter 1 Before Use

1.5 Ink Tank Replacement Method

When Ink Near End is Displayed

Ink levels are low. We recommend replacing with new Ink tank as soon as possible. Note that ink may run
out during printing.
You can check which Ink tank must be replaced in INK STATUS on touch panel.

When Ink End is Displayed

The ink has run out. Replace with new Ink tank.
Thoroughly read the following and make sure you understand its contents.
"Ink and Other Liquid Handling Precautions"(P. 19)
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.

Replacing the Ink Tank

Replacing the ink tank

l RemoveInk tank
1
Lift up the cap cover.
• The machine detects that the cap cover is detached, allowing the tank to be removed.
Cap cover
52
"INK STATUS"(P. 102)