Table of Contents
Advertisement
5. Replacing the ink filter (When replace the ink tank)
To keep the ink in good quality in the ink tank, you need to replace the ink tank annually. When an appropriate
warning message appears, be sure to replace tank in the following procedure:
• When this function is executed, the remaining charge of the selected ink becomes 0, and unused ink to be
charged cannot be used. Be sure to use up the ink to be charged before executing the instinct function.
• Be sure to wear the accompanying gloves and safety glasses before working. The ink may get inyour eyes.
1
Remove the ink maintenance cover for the ink
tank to replace.
• Refer to the Step 1 to 6 of Chapter 4 "Replace the ink
tank" of the user's manual to perform the operation.
2
Replace the ink tank.
• Cover the surrounding area with waste cloth for protection
against dirt before changing the ink tank.
(1) Remove the ink filter attached to the ink tank.
• Loosen the joints on the top of the ink filter, and
remove the filter.
(2) Remove the ink tank.
• Take care not to tilt the ink tank greatly when
removing the tank. It may cause ink leakage from the
cap.
(3) Set a new ink tank, and mount the ink filter.
• Tighten the joints on the bottom of the ink filter.
Screw
Ink maintenance
8
cover
Screw
Joint
Ink filter
Ink tank
Advertisement
Table of Contents
