Adjusting Uv Light Level [Switching-Over Of High, Normal And Low] - MIMAKI UJF-605RII Operation Manual

Adjusting UV light level [Switching-over of HIGH, NORMAL and LOW]

STEPS:
1. Touch the [FUNCTION] in the LOCAL
mode.
2. Touch the JOG [ ] to select the [SETUP] .
3. Touch the [ENTER] twice.
4. Touch the JOG [ ] to select the [UV
LEVEL].
5. Touch the [ENTER].
6. Select the light level by touching the JOG
[ ] or [ ].
This display at the right indicates the [LAYER].
When selecting the other one except for the
[LAYER], follow the procedure from STEP10.
When [NO PRINT] is selected:
Select the light level by touching the JOG
[ ] or [ ].
Select from [HIGH], [NORMAL] and [LOW].
7. Touch the [ENTER].
- 5-22 -
FUNCTION
DATA CLEAR
FUNCTION
SET UP
TYPE *
QUALITY
TYPE *
UV LEVEL
TYPE *
UV LEVEL :NORMAL
TYPE *
UV LEVEL
TYPE *
NO PRINT :NORMAL
TYPE *
LAYER 1
<ENT>
<ENT>
<ent>
<ent>
:LAYER
:HIGH