When The Printer Is Not Used For A Long Time; Cautions During Maintenance; Care For The Table And The Exterior; Daily Care - MIMAKI UJF-605RII Operation Manual

Daily Care

Be sure to care for the printer according to frequency in use or periodically so as to use the
printer for a long time with high accuracy.

When the Printer is not Used for a Long Time

• Be sure to turn off the power. (
• Remove media set on the table.

Cautions during Maintenance

• Never disassemble the printer. Disassembling the printer can result in
electric shocks and failures of the printer.
• To prevent electric shocks and failures of the printer, keep out water.
• Turn off power and detach the power cable before maintenance, or an
unexpected accident may occur.
• Cool the UV lamp before maintenance, or it may cause a burn injury.
• Do not use benzene, thinner and chemical agents containing abrasives, or
they can deteriorate or deform the surface of the cover.
• Do not apply lubricating oil or the like inside the printer. Such materials can
cause failures or the printer.

Care for the Table and the Exterior

If the exterior of the printer gets dirty, wipe it off with soft cloth moistended water or natural
detergent diluted with water and squeezed. Also clean dust on the table.
P. 2-39)
- 3-2 -