Table of Contents
Advertisement
Registering the Various Setting
The FUNCTION mode has 6 kind of setting functions and the [SET UP] has 10 kind of
setting functions. The set functions are outlined below.
Function Names
DATA CLEAR
UV LAMPOFF
SET UP
TYPE
QUALITY
Y DISTANCE
UV LEVEL
REFRESH
PRIORITY
INK LAYER
COLOR PTN.
UV SCAN ADD
MM/INCH
SETUP RESET
MAINTENANCE
ORIGIN
DISPLAY
[QUALITY]
Sets the printing quality.
[Y DISTANCE]
[UV LEVEL]
Adjusts the light intensity. Normally, set [NORMAL]. Also setting [LAYER] allows
the setup the UV level for at most 4 layers according to each layer.
Deletes received data.
Turns the UV lamp off.
Registers a sequence of printing conditions.
Sets the print quality.
Adjusts scale of printing data.
Adjusts the UV lamp volume.
Refreshes the print head.
Specifies which the values are set by, the printer or the com-
puter.
P.4-6
Sets the number of overprinting.
Print a color pattern on the left edge of media to check the
nozzle out.
Performs UV irradiation near the completion of drawing.
P.4-6
Sets a unit of set values displayed.
Resets the current printing conditions.
Operates maintenance.
Sets the origin for printing.
Sets the language displayed.
[STD]
: Standard image quality
[Fine]
: High image quality and low printing speed
[HIGHspd]
: High printing speed and slightly inferior image quality
Adjusts scale of printing data.
±
Adjusted Value
:
0.39%
[NORMAL] : Standard light intensity
[HIGH]
: Strong light intensity
[LOW]
: Weak light intensity
[NONE]
: Close the shatter of the UV lamp to print.
[NOPRINT] : Set amout of UV light is irradiated without performing the printing.
[LAYER]
: Select the UV level according to each edition (layer).
Setting is available for at most 4 editions.
Summary
P.2-33
P.4-8
P.4-5
P.4-5
P.4-5
P.4-6
P.4-6
P.5-1~
P.2-24
P.4-9
- 4-5 -
P.4-4
P.4-6
P.4-7
P.4-7
Advertisement
Table of Contents
