Table of Contents
Advertisement
Precautions in use
Components needing periodic replacement
There are some parts which must be
•
replaced by service men. You have
to make a contract with distributors
or dealers for after-sale service.
Protection against dust
•
It is strongly recommended to use the
printer in a room that is not dusty. Set
the Refresh level 2 or 3 when in bad
environment.
When leaving the workshop after the
•
working hours, be sure to take off
media from the roll hanger. If media
is left on the roll hanger, dust can put
on it.
•
Store medium in a bag. Wiping off
dust accumulated on medium will
adversely affect the medium due to
static electricity.
•
Frequently wipe off the capping
station.
•
Dust in the head may cause drops of
ink to fall on the media during printing.
If this phenomenon takes place, be
sure to clean up the head.
(See P.2-29)
Warning labels
•
This printer is adhered with some
warning label. Be sure to understand
firmly the warnings given on the
labels. In the case where any of the
warning label has become so soiled
that the warning message is illegible
or has come off, purchase a new one
from your local distributor or our
office.
Front cover
•
Never open the front cover during
printing. Opening the cover or lever
will abort printing.
CAUTION
Adjusting the level
•
Adjust the level foot and keep the
printer in a horizontal position.
Ink cartridges
•
If the ink cartridge is moved from a
cold place to a warm place, then use
for three hours.
•
Open the ink cartridge just before
installing it in the printer. If it is
opened and not installed for a long
time, the printer may not print
normally.
•
Make sure to store ink cartridges in
a cold and dark place.
•
Be sure to thoroughly consume the
ink in the ink cartridge after opened.
If an extended period of time has
passed away after opening the
cartridge tank, printing quality would
be poor.
•
Do not use ink not authorized by
M I M A K I . M I M A K I w i l l n o t b e
responsible for any printer damage
caused by use of unauthorized.
•
The ink cartridge cannot be refilled.
•
Neither pound the ink cartridge nor
shake it violently so as to prevent
leakage of ink adhering locations.
Handling the antifreezing liquid
•
Be sure to store the antifreezing
liquid in a cold and dark place.
•
Be sure to store the antifreezing
liquid in a place that is out of reach
of children.
Handling the washing liquid
Be sure to store the washing liquid
•
for maintenance in a cold and dark
place. Also store it in a place that is
out of reach of children.
- xiv -
Advertisement
Table of Contents
