Table of Contents
Advertisement
[REFRESH]
Refreshes the print head to avoid nozzle clogging in a dusty place or dry place.
Select a refreshing time during printing or stand by.
A larger level results in more number of refreshes.
Number of refreshes : Level 0 ~ 3
[PRIORITY]
Specifies which the values of the [QUALITY] and the [INK LAYER] is set by the
printer or the computer.
[HOST]
[PLOT]
[INK LAYER]
Sets the number of overprinting.
Number of overprinting : 1 ~ 9
[COLOR PTN.]
Print a color pattern on the left edge of media to check the nozzle out while
plotting.
[ON]
[OFF]
approx.11mm
[UV SCAN ADD]
In the area where the drawing has just completed, sometimes the UV ink is not
hardened due to insufficient UV irradiation. In this case, a setting is made for
performing the scanning while irradiating UV in the vicinity of drawing completion.
[UV SCAN ADD] : 0-9
(When Level 0 is selected, the head is not refreshed.)
: The printing operation is performed with priority given to the
printing conditions set on the computer.
: The printing operation is performed with priority given to the
printing conditions set on the printer.
: Color pattern is printed at +20mm from left edge of maximum
printable area.
: Color pattern is not printed.
Color pattern
1.35mm
20mm
(No scanning at 0)
Image
Image
Table Origin
Table Origin
600mm
- 4-6 -
Advertisement
Table of Contents
