Cycle Stop - MIMAKI UJF-605RII Operation Manual

Cycle Stop

The ''Cycle Stop'' means that the operation stops after completing printing the data which is
currently printed.
STEPS:
1. Touch the [END] during printing.
2. The [CYCLE STOP] on the LCD blinks.
3. After printing, the LOCAL mode is dis-
played.
• Touch the [REMOTE] when starting
printing again.
• Delete the received data as well as
[Canceling Printing] when stopping
printing.
( P.2-33)
< REMOTE > CYCLE STOP
HiST1***
- 2-36 -
<< LOCAL >>
CYCLE STOP