MIMAKI UJF-605RII Operation Manual page 111

[MM/INCH]
Set a unit of setting values displayed.
When the printer is shipped from the factory, the unit of display is set to "mm"
(millimeter).
[MM]
[INCH] : The unit is set to inches.
[SETUP RESET]
This function resets the current printing conditions to the factory-set printing
conditions.
Execute this function for each of the types of set printing conditions.
[ENTER] :
[END]
: The unit is set to millimeters.
The setup is reset.
: The setup is not reset.
- 4-7 -