Replacing The Water For The Water Heater - MIMAKI UJF-605R II Daily Care Manual

Replacing the Water for the Water Heater

In order to keep the ink at an appropriate temperature, operate the water heater. Put the
antifreezing liquid and water in the water heater tank of the water heater. Make sure to
check it every six months.
Cautions for replacing
• Do not add water.
• Ratio of soft water to the antifreezing liquid should be
• When only soft water is put in the water heater tank without the antifreezing
• Check the water heater every six months to be sure the water heater tank is
• If the water in the water heater tank frequently becomes insufficient, contact your
• Discard the water/antifreezing liquid mixture by the disposal regulations of the
Cautions for handling the antifreezing liquid
• Be sure to wear the goggles and the gloves during handling the antifreezing
• Use the exclusive antifreezing liquid by MIMAKI , or the water heater may be
• Don't touch the antifreezing liquid directly. If it gets on the your skin or your
• Be sure to store the antifreezing liquid in a cold and dark place.
• Store the antifreezing liquid in a place that is out of reach of children.
• Have an industrial waste disposal contractor discard the waste antifreezing
• Before using the antifreezing liquid, be sure to read the Material Safety Data
• To purchase a space tank, contact your nearest sales agency or MIMAKI sales office.
• Prepare a polyethylene tank to move the waste water heater tank water.
• When the water in the water heater tank is insufficient, an error message is displayed
14
2 (Soft water) : 1 ( Antifreezing liquid) and then replace or exchange it.
liquid, it may damage the heads.
sufficiently clean and has the appropriate water.
nearest sales agency or MIMAKI sales office.
area where the printer is used.
liquid.
damaged.
clothes, immediately wash it off with soap. If you gets the antifreezing liquid in
your eyes, immediately wash your eyes with a lot of running water. Then, contact
a doctor as soon as possible.
liquid, clarifying its contents.
Sheet (MSDS).
as below. In this case, replace the water by the following steps.
ERROR 70
WATER LACK