Table of Contents
Advertisement
Turning off the UV Irradiation Device [UV LAMP OFF]
The UV irradiation device automatically goes OFF when no printing takes place for more
than 30 minutes. To make the UV lamp last longer, turn it OFF if you do not print for a long
time. When printing is restarted, the UV irradiation device automatically restarted and the
UV lamp is turned ON.
• You can set the time for which the UV lamp is on. Refer to "Setting the UV
Lamp timer" (
• When the setting value is the [ON] in the [OFF TIMER] or no printing is to
be carried out for 30 minutes or more, set the UV lamp OFF.
• Once the UV lamp is set to OFF, it takes approximately 10 minutes to turn
the UV lamp ON and enable to print.
STEPS:
1. Touch the [FUNCTION] in the LOCAL
mode.
2. Touch the JOG [ ] to select the [UV LAMP
OFF].
3. Touch the [ENTER].
4. Touch the [ENTER].
The UV lamp starts going out.
5. When the UV lamp is set to OFF and a
completion message appears, the same
message as STEP 2 is displayed.
P.5-19). Initial setting value is 30 minutes
- 4-8 -
FUNCTION
DATE CLEAR
< ENT >
FUNCTION
UV LAMP OFF
UV LAMP OFF
START
UV LAMP OFF
COMPLETED
FUNCTION
UV LAMP OFF
< ENT >
:ent
< ENT >
Advertisement
Table of Contents
