11. Remove the water heater tank.
• When moving the tank, take care not
to spill the water. If spilling it, be sure
to wipe it off.
12. Move the waste water in the water heater
tank to another polyethylene tank.
• When moving the water, take care not
to spill it. If spilling it, be sure to wipe it
off.
• Discard the waste water by the local
regulations of the area where this
printer is used.
13. Set the empty water heater tank into the
water heater.
14. Lock the catch clips and close the cover.
15. Touch the [ENTER].
Discharge of the antifreezing liquid in the printer is
started.
16. Touch the [ENTER] when the [WASTE AF]
is displayed.
- 3-11 -
WATER CHANGE
SET TANK
WATER CHANGE
PLEASE WAIT
WATER CHANGE
WASTE AF
:ent
:ent