MIMAKI UJF-605RII Operation Manual page 31

Adjustment Volume
It adjusts feeding and fixing the media.
TENSION : Adjusts tension.
VACUUM
BLOW
Sub Switch
There are switches for setting a media and you can operate the same functions as [Roll
Media Set] screen on the touch panel.
Use the touch panels and the sub switches for setting roll media.
Use the VACUUM switch for setting leaf media.
Roll
°
°
°
°
°
[Roll Media Set] Screen of the Touch Panel
Emergency Stop Switch
Two emergency stop switches are set at the top of the printer.
When pressing one of them in emergency, the power sauce is shield. For restarting, turn
the switch to cancel lock and turn on the printer.
: Adjusts adsorbability of media adsorption.
: Adjusts the amount for lift of the media during feeding.
Names of switches and contents of operations
Leaf
[TENSION]
-
Drives feeding side motor and operates the tension roller to tense the
media toward the feeding motor.
-
[LOCK]
Locks the free take-up side motor.
-
[FEED]
Drives the take-up side motor to take-up the media.
[VACUUM]
°
Adsorbs media and fixes it on the table.
-
[BLOW]
Discharges air and lifts up the media which is absorbed and fixed on
the table.
: effective
°
-
: ineffective
- 1-9 -