Table of Contents
Advertisement
18. Remove the UV illuminometer and BKT1.
• Do not touch the BKT1 and sensor
parts of the UV illuminometer because
they are very hot by the UV lamp. Wait
until they cool down completely, or it
may cause a burn injury.
19. Attach the flushing tray and then touch
the [ENTER].
20. Close the left maintenance cover.
After the origin is displayed, the printer returns to
the LOCAL mode.
- 5-31 -
UV LEVEL CHECK
SET A TRAY
PLEASE CLOSE
THE LEFT COVER
<< LOCAL >>
:ent
Advertisement
Table of Contents
