Table of Contents
Advertisement
Setting procedure of leaf media
When printing leaf media, the take-up unit is detachable. (You can also print with the take-
up unit.)
•
Make sure to turn off the printer before attaching or removing the take-
up unit.
Attaching / removing the take-up unit procedures
Fix the take-up unit in opposite procedure about removing.
1. Remove the power connector.
Take off the power cable of the take-up unit from
the connecter of the printer.
2. Loosen up the clamp levers.
Push out the right and left clamp levers from the
take-up unit and loosen up the clamp levers.
Take-up unit
- 2-19 -
Connector
Clamp levers
Advertisement
Table of Contents
