Features - MIMAKI UJF-605RII Operation Manual

Features

The features of the printer are described below. Together with the printer operation explained
in this manual, they help you understand how to print properly.
Ultraviolet ray curing ink is used
Use of ultraviolet ray curing ink (UV ink), which has been recently developed, enables direct
printing onto media.
High-speed interface is used
Use of high-speed interface IEEE1394 allows high-speed data reception from computers.
Curing and fixing of ink are enabled after printing
Use of an ultraviolet curing device (UV lamp) enables curing and fixing of ink after printing.
Wide printable area
The printable area is 600 mm (scan) x 500 mm (feed).
Printing on the film media
It is printable for thin roll film media from with 0.02 to 0.2mm, and for leaf film media from
with 0.02 to 2.0mm.
It is printable for a roll film media by automatic transport
This printer comes equipped with the take-up unit to print a roll film media by automatic
transport. It is also printable for a leaf film media. For a leaf film media, the take-up unit is
attachable.
A vacuum table is equipped
This unit is equipped with a suction-type vacuum table for fixing media.
- viii -