Resetting Uv Lamp Irradiation Time - MIMAKI UJF-605RII Operation Manual

Resetting UV Lamp Irradiation Time

After replacing the UV lamp, reset the irradiation time stored in this printer.
STEPS:
1. Select the [UV LAMP] from the mainte-
nance functions.
Enter the [MAINTENANCE] from the FUNCTION
menu.
2. Touch the [ENTER].
3. Touch the JOG [ ] or [ ] to select the
[INIT TIMER].
4. Touch the [ENTER].
5. Touch the [ENTER] again.
The irradiation time is initialized.
6. When the operation completes, the mes-
sage shown on the right is displayed.
7. Touch the [END] twice, to return to the
LOCAL mode.
- 5-18 -
MAINTENANCE
UV LAMP
UV LAMP
LEVEL CHECK
UV LAMP
INIT TIMER
INIT UV TIMER
INIT START
UV LAMP
INIT TIMER
<<LOCAL>>
<ENT>
<ent>
<ent>
:ent
<ent>