Table of Contents
Advertisement
Configurations and Functions
Front
15
14
Name
1
Sub switch
2
Right maintenance cover
3
Operation panel
(Touch panel type)
4
Exhaust duct
5
Pilot lamp
6
Power switch
7
Water heater
8
Waste ink tank
9
Level foot
10 UV lamp status indicator
11
Adjustment volume
12 Take-up unit
13 Roll set bar
IEEE1284 connector
14
IEEE1394 connector
15
16 Left maintenance cover
17 Front maintenance cover
1
17
16
13
12
11
Function
Provides some operations for media setting. (
Equipped with a capping station and opened and closed during
maintenance.
Provides operation for setup of the printer or displays operation
items by touching the panel. (
Exhausts the inside air of the printer.
Lights in green at work and lights in red in emergency.
Turns on/off the power of the printer.
Keeps ink at appropriate temperature. (
Waste ink gathers in this tank.(
Pressed it down to fix the printer.(
Indicates the UV lamp status. (
Error/UV lamp OFF (red); cooling (orange); enabled (green)
Adjusts the tension for media transport and vacuum/blow for
media.(
Rolls up the media.
Set a paper core in the center and lift the lever up to give
driving power to the paper core.
Bidirectional parallel interface connector.
A 400 M bps interface connector compatible with -IEEE.
Position for standby during printing. Equipped with a flushing tray
and opened and closed during maintenance.
Opened when setting media or correcting media jams. However,
to prevent the nozzles from clogging, keep the front cover closed
even if the power switch is OFF.
4
2
3
10
P.1-9)
- 1-4 -
5
6
7
8
9
P.1-9)
P.1-6)
P.3-8)
P.3-7)
P.1-3)
P.1-15)
Advertisement
Table of Contents
