Table of Contents
Advertisement
• If the printer is to be installed in a closed room, be sure to install a
ventilation system.
* Instructions for installing an exhaust outlet
Please observe the following things to prevent failures the
printer.
• The ink used for this printer falls into the category of UN no.3082 and
UN class 9. Since the ink is flammable, never allow an flame or spark
FLAMMABLE
to get near the ink any time.
• When cleaning the ink station and head, be sure to wear the supplied
goggle and gloves to prevent getting ink your eyes or on your.
• If anyone drinks ink or the washing liquid in mistake, get the person
to vomit immediately and see a doctor. Do not allow him or her to
drink vomit. Then, contact the Poison Control Center.
• If you inhale a lot of vapor and feel bad, immediately move to an area
where the air is flesh and then keep yourself warm and quiet. Then,
consult a doctor as soon as possible.
• Dispose the waste ink according to the local regulations of the area
where this printer is used.
WARNING
1. The shape of the exhaust outlet depends on your building
environment. The exhaust outlet area must be more than
half of the dust entrance area.
2. If you mount a valve on the exhaust outlet, be sure to open
the valve when using the printer.
- x -
Advertisement
Table of Contents
