Turning the Power on
1. Turn on the power to the printer.
Press the power switch to [I].
Turn on the power to display the opening screen
on the touch panel.
The initial operation of the printer is performed.
• If the temperature in the water heater has not reached the predetermined
value, the message is indicated. In this case, printing is disabled. It is
enabled when the error message disappears.
2. Select a media type on the [Menu] screen
on the touch panel.
Touch the [Roll Print] for roll print.
When not setting roll media, touch the [Roll Media
Set].
Refer to [Setting Media]. (
P.2-8)
- 2-3 -
<<LOCAL>>
WATER NOT READY