MIMAKI UJF-605RII Operation Manual page 51

Setting procedure of roll media
• The weight of a roll holder and a roll
media is approximately 25kg. Set the
roll media by two persons.
1. Set the roll the holder.
Turn the roll holder knob counterclockwise and
clip the edge of the roll holder.
2. Attach the roll holder to the roll media.
Attach the roll holder to the both edges of the
paper core of the roll media.
Turn the roll holder knob firmly clockwise to fix.
3. Attach the roll holder to the empty paper
core.
Attach the roll holder to the both edges of the
empty paper core of the roll media.
Turn the roll holder knob firmly clockwise to fix.
• Previously turn the handle counter-
clockwise to open the holder guide
widely.
• Put down the roll set lever.
4. Attach the roll media to the feeding unit.
With the roll holder attached to the both edges,
attach the roll media to the feeding unit.
Roll holder
Roll holder
Roll holder
Roll media
Feeding unit
- 2-9 -
Knob
Roll media
Knob
Empty paper core
Knob
Holder guide
Handle
Roll set lever