MIMAKI UJF-605RII Operation Manual page 19

Roll media space
Leave a margin 1000mm or more from the
anterior end of the roll media. It may cause
wrinkles.
1000mm or more
Face out
Face in
Feeding side
Do not print up to the posterior end of the
roll media. Leave a margin 1000mm or more
from the end. It may cause wrinkles.
Media
Vacuum table
Leave a space in RIP between each printing
part not to cause wrinkles. Otherwise the
wrinkles in printing parts and space may
cause new wrinkle at next printing part.
Printing parts
Printing parts
Roll media
Printing parts
CAUTION FOR PRINTING
Media
Vacuum table
1000mm or more
Face out
Face in
Feeding side
space
space
Place images in RIP on the media which has each
10mm or more margin from the right and left
sides. Vacuuming allows the ink to pull forward
the table and table height changes according to
the amount of the attached ink.
Leave the more than
10mm margin
Roll media
Do not print in the way which the printing part tilts
toward at right or left toward according to the
media width. It may cause unequal width of the
rolled-up media and wrinkles.
Roll media
About unusable films
Pouched films or tube films are unusable because
they cannot be adsorbed to the table.
- xvii -
Leave the more than
10mm margin
Printing parts