Table of Contents
Advertisement
Abnormal Pattern
If an abnormal pattern like the one shown on the right is printed,
clean the heads. There are two types of cleaning. Select one of
them according to the result of the test pattern.
Normal :
Select this if any line is disappears.
Hard
:
Select this if the abnormal pattern is
not recovered.
If the printing quality is not improved, clean the suction nozzle and the caps. Refer to
"Chapter3 Daily Care"
STEPS:
1. Touch the [CLEANING].
2. Touch the JOG [ ] or [ ] to select the print
heads to be cleaned.
3. Touch the JOG [ ] or [ ] to display the
print heads to be cleaned.
Select [*] for the heads not to be cleaned.
4. Touch the [ENTER].
5. Touch the JOG [ ] or [ ] to select a type
of cleaning.
6. Touch the [ENTER].
7. Touch the [ENTER] to start the cleaning.
Cleaning is started.
8. After the cleaning, the printer returns to
the LOCAL mode.
9. Origin has been setting automatically.
Therefore repeat printing the test pattern, and
check the result.
- 2-29 -
CLEANING
COLOR
:KCMYcmW
CLEANING
COLOR
:KCMYcmW
CLEANING
COLOR
:K**Y****
CLEANING
TYPE
:NORMAL
CLEANING
TYPE
CLEANING
START
** CLEANING**
******----------------
<< LOCAL >>
:HARD
:ent
Advertisement
Table of Contents
