Table of Contents
Advertisement
11. Open the front maintenance cover and the
rear cover.
•
When opening the cover, make sure to
hold the cover with the holding bar.
Otherwise the cover fall down and it
may cause some injuries.
12. Select the feeding and take-up directions
of media.
Select either [Face in] or [Face out] when feeding
and taking up media by the touch panel.
Select each [Face in] or [Face out] for the direc-
tion of the feeding and take-up.
Select each of directions separately for the feed-
ing or take-up. Default is set only [Face in] for
both the feeding and the take-up directions.
Face out
Face in
Feeding side
13. Pull out the roll media.
Pull out the roll media forward the table through
the roller.
Face out
Face in
Feeding side
Feeding volume encoder
Tension sensor
Feeding volume encoder
Tension sensor
- 2-11 -
Front maintenance
cover
Media
Vacuum table
Media
Vacuum table
Rear cover
Face out
Face in
Take up side
Take up side
Advertisement
Table of Contents
