Changing The Ink Set [Ink Set]; Changing To 6-Color Ink Set - MIMAKI UJF-605RII Operation Manual

Changing the Ink Set [INK SET]

The standard ink set for this printer has 7 colors (black, cyan, magenta, yellow, light cyan,
light magenta and white). You can change it to the following ink sets:
*Changing to 6-color ink set (only 6 colors, white ink is not used)
*Changing to 8-color ink set including a spot color
*Changing to a spot color instead of white ink
• Don't open the cover or turn the power OFF while changing the ink set,
otherwise changing of the ink set could not be performed.
• Set the ink cartridge containing sufficient quantity of ink. If it does not
contain sufficient quantity of ink, changing of the ink set could not be
performed properly because of the ink fill up abnormality.
• Check the capacity of waste ink tank. If the tank is filled with the waste ink,
dispose it before performing this procedure. (

Changing to 6-color Ink Set

The following procedures explain about changing from 7-color ink set to 6-color ink set.
STEPS:
1. Touch the [ ] or [ ] to select the [INK
SET].
2. Touch the [ENTER].
3. Select 6-color ink set.
Touch the JOG [ ] or [ ] to select the [Uv-6
[KCMYcm].
4. Touch the [ENTER].
5. Touch the [ENTER].
6. Remove the white ink cartridge.
7. Touch the [ENTER].
Clean the waste ink in the printer.
P.3-7)
- 5-9 -
INK SET
Uv-7 [KCMYcmS ]
INK SET
Uv-6 [KCMYcm ]
INK SET :KCMYcm
SET UP OK?
INK SET :∗∗∗∗∗∗W
REMOVE CARTRIDGE
:ent