Table of Contents
Advertisement
8. Select the [UV LEVEL] by touching the
JOG [ ] or [ ].
When selecting the [INVALID], the layer is printed
by the light level of the previous layer after that.
Ex.: For 4 layers, select the [INVALID] of the
layer 3 and the light level of the layer 1 and
2 become effective. That allows the repeat-
ability of the layer by effective light level.
This means the layer 3 is printed by the light
level of the layer 1, and the layer 4 is printed
by the light level of the layer 2.
9. Select the next layer by touching the
[ENTER].
When LAYER 4 or [INVALID] is selected, the
setting will be terminated.
10. Touch the [ENTER] key.
11. Touch the [END] three times, the device
returns to the LOCAL mode.
- 5-23 -
TYPE *
LAYER 1
:NORMAL
TYPE *
LAYER 2
TYPE *
UV LEVEL
<<LOCAL>>
:HIGH
<ent>
Advertisement
Table of Contents
