MIMAKI UJF-605RII Operation Manual page 88

7. Open the left maintenance cover.
• When opening the cover, make sure to
hold the cover with a holding bar.
Otherwise the cover may fall down and
it may cause some injuries.
8. Wipe off the waste ink from the flushing
tray with the paper towel moistened with
the washing liquid. Also, remove the
caked ink by patting the tray with the
paper towel.
• If the UV ink is dried out under the UV
light and can not be removed, it may
cause head damages and the flushing
tray must be replaced to new one.
Contact your local dealer for a replace-
ment.
9. Close the left maintenance cover and then
touch the [ENTER].
The initial operation is performed, then the printer
returns to the LOCAL mode.
Holding bar
- 3-6 -
STATION
COMPLETED
PLEASE WAIT
<< LOCAL >>
: ent