Table of Contents
Advertisement
Mode for the UV Lamp Status Indicator
Mode
Ready mode
ON/blink (green)
OFF
After Cooling mode
ON (orange)
OFF
Error mode
OFF
Description of indicator lamps
[Printing enabled]
UV lamp being pre-
heated (Blink) preheat-
ing completed (ON)
UV lamp steadily ON
(Preheating time: 2
minutes and 30 sec-
onds to 3 minutes)
[Printing disabled]
UV lamp OFF
or the other two modes
[Printing disabled]
UV lamp being
cooled
(6 minutes)
The other 2 modes
[Printing disabled]
Error occurred
(The UV lamp goes
OFF.)
Normal
- 1-16 -
Description
When touching [REMOTE] or [TEST] and
selecting [TESTDRAW], preheating of the
UV lamp starts.
When preheating is completed, the UV lamp
is ready and printing starts.
The UV lamp is not ready
The UV lamp goes OFF in the following
cases:
• When operation for setting the UV lamp
OFF is carried out
• When 30 minutes or more have elapsed
after printing
• When an error has occurred in the
printer
After the UV lamp has been set OFF, it
is cooled. The UV lamp cannot be set ON
again and the printer cannot start printing
until this light goes off.
ON (red)
1. Error in UV power
2. UV lamp overheated. The UV lamp goes
OFF, the lamp cooling fan stops and
printing with the printer also stops.
3.When the UV irradiation device shutter
does not work normally.
Advertisement
Table of Contents
