Removing Pump Case (Lower) - TOHATSU EverRun MX 18E2 Service Manual

Lower Unit
1
3
2
5
OBM OBM
OBM
1
1 Oil seal
Do not reuse.
LIT
LIT
6-18
8) Inspection of Water Pump
1.
2.
3.
a
4

9) Removing Pump Case (Lower)

1.
10) Disassembly of Pump Case (Lower)
1.
11) Assembly of Pump Case (Lower)
1.
2
1
GEAR GEAR
GEAR
2.
Check pump case (upper) 1 for deformation. Replace if
necessary.
Check impeller 2 and pump case liner 3 for damaged and
wear. Replace if necessary.
Check key 4, water pump guide plate 5 and drive shaft
groove a for wear. Replace if necessary.
Remove pump case (lower).
Use bladed screw driver or seal remover to remove oil seal
1.
Apply gear oil to oil seal circumference before installing oil
seal. Install oil seal into pump case (lower) with number side
facing downward.
Oil Seal Attachment 3 1 :
P/N. 3BJ-99820-0
Driver Rod 2 :
P/N. 3AC-99702-0
Apply LIT grease to oil seal lip.
GB
2st X18E2 2012