TOHATSU EverRun MX 18E2 Service Manual page 290

Lower Unit
1
6-50
c
0
OBM OBM
OBM
1342 1342
1342
9
Put pump case (upper) 9 on the drive shaft, and install it
6.
on the pump case (lower) 0.
While installing pump case 9, turn drive
shaft 6 clockwise to bend all impeller
blades in counterclockwise on power unit
direction.
OBM
OBM OBM
Attach water pipe seal q (RP).
7.
Apply OBM grease thinly on the inside c of water
pipe seal so that water pipe can be inserted
smoothly.
33) Attaching of Clutch Cam Ass'y
Perform shim adjustment when ball bearing, gear,
drive shaft, propeller shaft or gear case is
replaced.
Install cam rod ass'y 1 as shown.
1.
Be careful of direction of cam rod.
Cam Rod Bushing Bolt :
6 N · m (4 lb · ft) [0.6 kgf · m]
CAUTION
2st X18E2 2012
GB