TOHATSU EverRun MX 18E2 Service Manual page 214

Power Unit
4 4
5-62
3 3
3 3
4 4
3 3
4 4
1) Apply grease to special tool 3, and then attach needle
bearing. When in this procedure, do not use all of the
needle bearings.
MOL
MOL MOL
Roller Setting Piece 3 :
P/N. 3LD-72216-0
2) Insert special tool 3 with needle bearing, and then
insert remaining needle bearing. Then attach washers 4
to both side.
· When assemble, attach two washers opposite
side, for easy and even insert needle bearing.
· After insert needle bearing, re-attach washer to
both side.
GB
2st X18E2 2012