Inspection Of Magneto Basement; Removing Advancer Arm; Removing Intake Silencer And Carburetors - TOHATSU EverRun MX 18E2 Service Manual

Power Unit
1 1
2 2
4
1 1
1 1
5-30
3
2
1
LIT
LIT

5) Inspection of Magneto Basement

Check oil seal 1 and O-ring 2 for wear, Replace if
1.
necessary.
2. When replace oil seal, apply engine oil to periphery of oil
seal, and install into magneto basement with number side
facing downward. Apply grease to lip of oil seal.
Driver Rod 3 :
P/N 3AC-99702-0
Oil seal Attachment 4 :
P/N 3T1-99820-0
LIT
LIT

6) Removing Advancer Arm

Loosen nylon nut, and then remove advancer arm 1.
1.
7) Removing Intake Silencer and
Carburetors
Remove two grommets and intake silencer 1.
1.
2. Loosen throttle lever end bolt.
GB
2st X18E2 2012