TOHATSU EverRun MX 18E2 Service Manual page 256

Lower Unit
2
2
GEAR GEAR
GEAR
1
2
3
5
6-16
1
3
1
A
Forward
direction
2
4
Remove spring pin 2, clutch cam 3 and cam rod bushing
2.
from cam rod 1.
Do not reuse removed spring pin.
Spring Pin Tool A (ø3.0):
P/N. 345-72227-0
5) Inspection of Cam Rod and Clutch Cam
Check cam rod 1 and clutch cam 2 for wear and damage.
1.
Replace if necessary.
6) Assembly of Cam Rod and Clutch Cam
1. Reassemble.
Be careful of direction of cam rod.
7) Removing of Water Pump
1. Loosen and remove pump case (upper) bolts, and remove
pump case (upper) parts 1, 2, 3, 4 and 5 in this order.
GB
2st X18E2 2012