Download Print this page

Special Tools; What's Peak Voltage; Merit Of Adoption Of Peak Voltage Measurement; Recommended Tester - TOHATSU EverRun MX 18E2 Service Manual

Hide thumbs Also See for EverRun MX 18E2:

Advertisement

Available languages

Available languages

Electrical System

1.Special Tools

1 1
Spark Tester
P/N. 3F3-72540-0
Inspecting spark

*What's Peak Voltage

It is the method peak voltage measurement, at one of decision method of ignition system and charge system, of turning
the flywheel and peak voltage (instantaneous maximum voltage) measuring dynamically.

Merit of adoption of peak voltage measurement

1.At the precision which is higher than past of decision and defective place or parts can be executed much faster.
2. Good or faulty condition can be checking without removing the parts.

Recommended tester

Notes:
1 Use HIOKI HiTESTER MODEL 3030 or equivalent tester for this measurement, and do not use megger or
other instrument.
2 Disconnect all connections, and measure as an independent unit.
3 When the tester's pointer moves, the result is "ON", or "OFF" when not.
4 The value enclosed by ( ) is approximately value measured using 1kΩ range of the tester. Note that the value
varies among conditions of the tester (internal power supply), measurement ranges and models.
5 Perform this inspection only as a guide.
8-2
2 2
Peak Voltage Adapter
P/N. 3AC-99550-0
Checking Peak Voltage*
3 3
Tachometer
P/N. 3AC-99010-0
Measuring engine revolution
speed
GB
2st X18E2 2012

Hide quick links:

Advertisement

loading