TOHATSU EverRun MX 18E2 Service Manual page 56

Service Data
escription
Ignition Coil
Magneto
(Alternator)
Spark Plug
C. .unit
Thermostat
Pump Impeller
Pump Case Liner
Guide Plate
Anode
Propeller Shaft
rive Shaft
Propeller
Oil Seales
2-10
Item
rimary coil resistance
(between B - B/W, B/R, B/G lines)
Secondary coil resistance
(between high tension cord and B line)
Ignition timing
Alternator (max.)(option)
Charging performance
Exciter coil resistance
Exciter coil peak volts (reference) Between R-L
Standard plug
lug gap
Between B/Y-B
C.D.unit peak volts (reference)
Opening and closing of thermostat valve
Wear and cracks
Corrosion
Damage to bearing
Wear on lip of oil seal
Damage to bearing
Shaft run-out
Wear on lip of oil seal
Wear, warping, cracking, chipping
Wear, damage
Standard Values
0.2 ½ ± 15 % @20¡C (68¡F)
5.8 k½ ± 20 % @20¡C (68¡F)
ATDC 3¡ Ð BTDC 25¡
10 mm (0.4 in) or over
80 W
5500 r/min 12 V 5 A
210 ½ @20¡C (68¡F)
260 V or more Ð at cranking (500 r/min)
280 V or more Ð at idling (1000 r/min)
220 V or more Ð at 1500 r/min
150 V or more Ð at 3000 r/min
NGK : B 7-HS10
0.9 mm Ð 1.0 mm (0.035 in Ð 0.039 in)
250 V or more Ð at cranking (500 r/min)
268 V or more Ð at idling (1000 r/min)
210 V or more Ð at 1500 r/min
140 V or more Ð at 3000 r/min
Valve start temperature : 50 Ð 54¡C
Valve full-open temperature : 63 Ð 67¡C
Valve full-open lift : 3.0 mm/0.118 in or more
0.5 mm/0.020 in or less <Using both center holes for reference>
2st X18E2 2012