TOHATSU EverRun MX 18E2 Service Manual page 238

Power Unit
1342 1342
1342 1342
5-86
●Apply "Three Bond" 1342 to starter shaft bolt, and tighten
the bold to specified torque.
Starter Shaft Bolt :
6 N · m (4 lb · ft) (0.6 kgf · m)
1342
1342 1342
●When winding starter spring, turn reel 5 times to direction
to which the reel rotates when pulling out starter rope
(counterclockwise).
●After installing recoil starter to outboard motor, perform
shift operation to check that recoil starter is locked at other
than neutral (N) position.
GB
2st X18E2 2012