TOHATSU EverRun MX 18E2 Service Manual page 194

Power Unit
"
#
$
5-42
!
'
&
%
a a
14) Removing Exhaust Cover
1. Loosen exhaust cover mounting bolts in the order shown,
remove them, and remove exhaust cover.
Loosen the bolts in descending order of the
numbers embossed on the exhaust cover.
· Pry the gap of the cover at two grooves
by one by using a bladed screw driver.
· The cover can be removed easier if parts
cleaning agent is applied in the gap one by one
from the top one. Be careful to pry the gap
evenly, or the cover may be damaged or
warped.
GB
a one
2st X18E2 2012