Assembling Tilt Mechanism - TOHATSU EverRun MX 18E2 Service Manual

Bracket
7 7
8 8
6 6
9 9
2 2
7-40
Remove reverse lock spring 6. Then remove reverse
3.
lock link rod 7 and lever 8.
Remove reverse lock spring(S) 9.
4.
Remove E-rings, and then, remove reverse lock shaft 0.
5.
0 0

15) Assembling tilt mechanism

Install reverse lock arm 1 and reverse lock spring(S) 2
1.
as shown.
1 1
Install reverse lock shaft 3 into swivel bracket and
2.
reverse lock arm. Then, install E-ring to reverse lock
shaft.
3 3
Spring Pin Tool B (ø3.0) :
P/N. 345-72228-0
GB
2st X18E2 2012