13) Removing Pump Case (Lower)
1.
Remove pump case (lower).
14) Disassembly of Pump Case (Lower)
Use bladed screw driver to remove oil seal 1.
1.
15) Assembly of Pump Case (Lower)
1.
Apply engine oil to periphery of new oil seal, and install into
pump case (lower) with number side facing downward.
Oil Seal Attachment 3 1 :
P/N. 3AG-99820-0
Driver Rod 2 :
P/N. 3AC-99702-0
2.
Apply OBM grease to lip of oil seal.
16) Removing Clutch Cam and Cam Rod
Remove cam bushing bolt 1, and cam rod 2 ass'y upward
1.
to remove.
17) Disassembly of Clutch Cam and Cam Rod
Remove spring pin 2, clutch cam 3 and cam rod bushing
1.
from can rod 1.
• Use spring pin tool A to remove spring pin.
• Do not reuse removed spring pin.
Spring Pin Tool A :
P/N. 345-72227-0
25/30 2006
OBM
OBM
OBM
1
1 Oil seal
Do not reuse.
2
1
GEAR
GEAR
GEAR
2
1
6
1
2
2
3
6-15