Table of Contents
Advertisement
4.7.1.e. VLAN Port Configuration Menu
On the VLAN Management Menu, pressing "S" command opens the VLAN Port
Configuration Menu screen, as shown in Fig. 4-7-5. In this screen, you can
configure the port VLAN settings.
PN27089K/PN27089KA Local Management System
VLAN Management -> VLAN Port Configuration Menu
Port PVID Acceptable Frame Type
---- ---- ---------------------
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
-------------------------------- <COMMAND> -----------------------------------
[N]ext page
[P]revious Page
Set Port [V]ID
Command>
Enter the character in square brackets to select option
Screen Description
Port
Indicates the port number.
PVID
Indicates a PVID (Port VLAN ID) that has been set to the port. PVID displays
VLAN ID to which untagged packet should be transferred when it was
received. The factory default setting is 1. When tagged packet was received,
destination port is determined by referring the tag regardless of PVID.
Acceptable
Indicates type of received frame.
Type
Admit All
Tagged
Only
Admit All
Admit All
Admit All
Admit All
Admit All
Admit All
Admit All
Admit All
Set [F]rame Type
[Q]uit to previous menu
Fig. 4-7-5 VLAN Port Configuration Menu
Receives all frames.
Receives only the tagged frames.
96
Advertisement
Table of Contents
