Table of Contents
Advertisement
Power port
Connect the supplied power cord into the port and connect the other end into
an electric outlet.
Power cord hook block
Hooking the supplied power cord on the block makes the cord less likely to be
unplugged from the power port.
MAC address label
Displays the MAC address of this Switching Hub.
Serial number label
Displays the serial number of this Switching Hub.
PoE power supply supported 10/100BASE-TX port (Ports 1 to 8)
Supports IEEE802.3af PoE power supply. Connection with 10/100BASE-TX
terminal, hub, repeater, bridge, and switching hub is possible.
The length of the twisted pair cable connecting this Switching Hub and a
device must be 100 m or shorter.
10/100BASE-TX port LEDs (Ports 9 to 10)
The length of the twisted pair cable connecting this Switching Hub and a
device must be 100 m or shorter.
SFP extension slots (Ports 9 to 10, Select either of 10/100/1000BASE-T port or
SFP for use)
The supported SFP modules (sold separately) can be attached to the slots.
Console port
Used to connect a VT100 compatible terminal to configure and manage this
Switching Hub.
Transmission mode:
Transmission speed: 9600 bps
Stop bit:
Flow control:
RS-232C
Emulation mode:
Data length:
1 bit
Parity control:
None
Communication connector:
15
VT100
8 bits
None
RJ45
Advertisement
Table of Contents
