Panasonic Switch-M8ePWR PN27089KA Operation Manual page 126

Screen Description
DLF Enables/disables the unknown unicast storm control.
Enabled
Disabled
Broadcast Enables/disables the broadcast storm control.
Enabled
Disabled
Multicast Enables/disables the multicast storm control.
Enabled
Disabled
Threshold Displays the threshold of traffic rate (Mbps).
Available commands are listed below.
D Enable/disable the unknown unicast storm control.
Press "D." The command prompt changes to "Enter port number>." Enter a port number
to change the setting. Then, the command prompt changes to "Enable or Disable DLF
storm control status (E/D)>." Press "E" to enable the unknown unicast storm control,
and press "D" to disable it.
B Enable/disable the broadcast storm control.
Press "B." The command prompt changes to "Enter port number>." Enter a port number
to change the setting. Then, the command prompt changes to "Enable or Disable
broadcast storm control status (E/D)>." Press "E" to enable the broadcast storm control,
and press "D" to disable it.
M Enable/disable the multicast storm control.
Press "M." The command prompt changes to "Enter port number>." Enter a port
number to change the setting. Then, the command prompt changes to "Enable or
Disable multicast storm control status (E/D)>." Press "E" to enable the multicast storm
control, and press "D" to disable it.
T Set the threshold of traffic rate (Mbps).
Press "T." The command prompt changes to "Enter port number>." Enter a port number
to change the setting. Then, the command prompt changes to "Enter threshold value."
Enter the threshold of traffic rate between 1 and 100 (Mbps) for Ports 1 to 8 and
between 1 and 1000 (Mbps) for Ports 9 to 10.
Q Return to the previous menu.
The unknown unicast storm control is enabled.
The unknown unicast storm control is disabled.
(Factory default setting)
The broadcast storm control is enabled.
The broadcast storm control is disabled. (Factory default setting)
The multicast storm control is enabled.
The multicast storm control is disabled. (Factory default setting)
126