Table of Contents
Advertisement
Available commands are listed below.
V
Configure PVID settings.
Press "V." The command prompt changes to "Enter port number>." Enter a port number
to change the setting. Then, the command prompt changes to "Enter PVID for port #>."
Enter VLAN ID you wish to modify among the already configured VLAN IDs.
F
Set type of receive packet.
Press "F." The command prompt changes to "Enter port number>." Enter a port number
you wish to modify. Then, the command prompt changes to "Select port acceptable
frame type (A/T)>." Enter "A" to receive all the frames, or "T" to receive only the tagged
frames, respectively.
Q
Return to the previous menu.
Note:
This Switching Hub is possible to assign multiple VLANs to one port.
When new VLAN was configured, it belongs to both VLAN to which it
has belonged and the new VLAN. So, when you divide the domain,
make sure to delete it from a VLAN to which it has belonged.
97
Advertisement
Table of Contents
