Table of Contents
Advertisement
Middle and control the total power supply to 62 W or below.
Failure to meet the above conditions may result in fire, electric shock, breakdown,
and/or malfunction. Please take notice because such cases are out of guarantee.
Additionally, do not cover the bent hole of this Switching Hub.
Deviation could lead to high internal temperature, equipment failure and/or
malfunction.
When using two Switching Hubs, do not stack them. When you place them side by
side, allow for a space of 20 mm or more between them. This space is not necessary if
you use PN71052 connection brackets.
When stacking Switching Hubs, leave a minimum of 20 mm space between them.
1. Panasonic will not be liable for any damage resulting from the operation not in
accordance with this document or the loss of communications, which may or may
not be caused by failure and/or malfunction of this device.
2. The contents described in this document may be changed without prior notice.
3. For any question, please contact the retailer where you purchased the product.
* Brands and product names in this document are trademarks or registered trademarks
of their respective holders.
6
Advertisement
Table of Contents
