Table of Contents
Advertisement
4.10. Save Configuration to Flash
On the Main Menu, pressing "F" opens the Save Configuration to Flash screen as
shown in Fig. 4-10-1. Execute this command to save the Switching Hub
configuration to flash memory. On this screen, the command prompt displays
"Save current configuration?(Y/N)." Press "Y" to save the configuration.
Otherwise, press "N."
If you don't save the configuration, the changed configuration will be cleared
after system reboot or power cycle.
PN27089K/PN27089KA Local Management System
Main Menu -> Save Configuration to Flash
Save current configuration? (Y/N)>
Y for Yes; N for No
Fig. 4-10-1 Save Configuration to Flash screen: Confirm whether to save or not
180
Advertisement
Table of Contents
