Table of Contents
Advertisement
Available commands are listed below.
S
Set the IP address of the TFTP server with the firmware to be upgraded installed.
Press "S." The command prompt changes to "Enter IP address of TFTP server>."
Enter an IP address of TFTP server.
F
Set the file name of the firmware to be upgraded.
Press "F." The command prompt changes to "Enter file name>." Specify the file
name in 39 characters or less.
U
Start the upgrade.
Press "D." The command prompt changes to "Download file(Y/N)>." Confirm
whether or not to start the process. Press "Y" to start the upgrade. Press "N" to
cancel the upgrade.
Q
Return to the previous menu.
166
Advertisement
Table of Contents
