Power Over Ethernet Configuration - Panasonic Switch-M8ePWR PN27089KA Operation Manual

4.7.9. Power Over Ethernet Configuration

On the Advanced Switch Configuration Menu, pressing "P" opens the Power
Over Ethernet Configuration Menu as shown in Fig. 4-7-28. You can configure
IEEE 802.3af power supply.
PN27089K/PN27089KA Local Management System
Advanced Switch Configuration -> Power Over Ethernet Configuration Menu
PoE [P]ort Configuration
PoE [G]lobal Configuration
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-7-28 Power Over Ethernet Configuration
Available commands are listed below.
P Configure PoE for each port.
Press "P." The PoE Port Configuration Menu opens. Refer to 4.7.9.a.
G Configure PoE settings.
Press "G." The PoE Global Configuration Menu opens. Refer to 4.7.9.b.
Q Return to the previous menu.
138