Snmp Trap Receiver Configuration - Panasonic Switch-M8ePWR PN27089KA Operation Manual

4.6.3.b. SNMP Trap Receiver Configuration
On the SNMP Configuration Menu screen, pressing "T" opens the SNMP Trap
Receiver Configuration Menu screen, as shown in Fig. 4-6-6. On this screen, you
can set the SNMP Trap settings.
PN27089K/PN27089KA Local Management System
SNMP Configuration -> SNMP Trap Receiver Configuration Menu
Trap Receiver List:
No. Status
---- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Receiver [S]tatus
Set Receiver [C]ommunity In[d]ividual Trap Config
Command>
Enter the character in square brackets to select option
Fig. 4-6-6 SNMP Trap Receiver Configuration
Screen Description
Trap Receiver Displays the IP address and the community name for the current trap
List: receiver.
No.
Status
IP Address
Community
IP Address Community
--------------- ----------------------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Set Receiver [I]P
Displays the entry number for the trap receiver.
Displays the trap sending setting.
Enabled Sends traps.
Disabled Does not send traps.
Displays the IP address of the trap receiver.
Displays the current community name, set for sending traps.
46
[Q]uit to previous menu