Table of Contents
Advertisement
Screen Description
SNMP
Displays the trap sending settings for an SNMP authentication failure.
Authentication
Enabled
Failure:
Disabled
Enabled Link
Displays the port number to which a trap is sent, when its link status
Up/Down Port:
changes. All ports are assigned in factory default setting.
PoE Trap
Displays the PoE trap control settings.
Control:
Enabled
Disabled
Temperature
Displays the trap sending settings when the internal temperature is above or
Trap Control:
below the preset temperature.
Enabled
Disabled
Temperature
Displays the threshold temperature value to send the trap.
Threshold:
The factory default setting is 66 degrees C.
FAN Failure:
Displays the trap sending settings for an internal fan failure.
Enabled
Disabled
Enables the trap sending.
Disables the trap sending. (Factory default setting)
Enables the trap sending. (Factory default setting)
Disables the trap sending.
Enables the trap sending.
Disables the trap sending. (Factory default setting)
Enables the trap sending. (Factory default setting)
Disables the trap sending.
49
Advertisement
Table of Contents
